Solder wire is the most common solder material in the electronics industry. Tin wire is an alloy material that forms a wire. The correct use of solder wire is conducive to improve production efficiency, so we must control the temperature when soldering, the appropriate temperature to ensure that the solder wire plays a good functional effect, so temperature control is very important. Then how to control the temperature when using solder wire? The following staff from Shenzhen Xinghongtai factory introduce to you:

1. When the solder wire is soldered, the temperature should be effectively controlled so that the solder wire has a good soldering effect. When the solder wire is soldered, the appropriate solder wire should be avoided in the solder pot, the solder pot should be connected, the power switch should be turned over, and then the temperature should be adjusted to about 250 degrees Celsius. The solder wire should be tinned on the red heating tube. Dispose of to ensure that the entire tin surface can completely cover the heating tube. When the solder wire is melted, the number of solder wires should be properly added to ensure that the tin surface is at a suitable temperature.

2. When the solder wire is used, it is assumed that there is still solder wire in the tin furnace. Do not block the heating power of the soldering furnace. At this time, the temperature should be properly controlled. The set temperature should not be too high. To avoid accelerating the oxidation reaction of the tin surface. Generally, we can control the temperature of 63/67 solder wire at 250 degrees Celsius, the temperature of 50/50 solder wire should be controlled at 280 degrees Celsius, and the 30/70 solder wire should be controlled at 300 degrees Celsius.

3. When the temperature of the soldering iron of the soldering wire is investigated, it should not be investigated only by the appearance of the tin furnace itself. This will only form a large contrast error. It should be pricked into the tin furnace for testing, generally high temperature soldering. The working temperature of the wire should be controlled within 400-500 degrees Celsius. If the temperature is not reached, it will form a problem of continuous welding and no solder joints. Therefore, when using solder wire for soldering, the temperature should be strictly controlled so as to ensure the soldering quality of the solder wire.

The above how to control the temperature when using solder wire is shared here. Solder wire is widely used in the soldering, soldering and hardware industries of the electronics industry for wave soldering, dip soldering and other precision welding. You can understand together with the low temperature that the solder wire we mentioned last time can withstand.